Chimney Pro Solutions
Most Reliable Chimney & Fireplace Services company for Homeowners Throughout King County Since 2011.

Complete reconstruction of a 1920s brick chimney in the Capitol Hill neighborhood of Seattle. The original chimney had severe structural deterioration including collapsed mortar joints throughout, crumbling brick from decades of freeze-thaw cycles, a failed liner, and a crown that had long since disintegrated.

Crown replacement on a Renton Highlands home where the original flat mortar crown had cracked severely and was allowing water to infiltrate the entire chimney structure. Efflorescence was visible on three sides of the chimney exterior, and the homeowner had noticed water in the firebox after heavy rain.

Complete repointing of all chimney mortar joints on a 1978 East Hill home in Kent. The mortar throughout the chimney had deteriorated to a depth of 1/2 to 3/4 inch in most joints, with several joints completely open. The homeowner had noticed white staining on the living room wall adjacent to the chimney a sign water was moving through the structure.

Custom multi-flue stainless steel chimney cap installation on a historic North End Tacoma home. The home had two separate flues one for the wood-burning fireplace and one for the gas furnace both uncapped. Raccoons had been nesting in the larger flue for at least two seasons, blocking proper draft and requiring wildlife removal before cap installation could proceed.

Premium gas log set installation in a West Seattle wood-burning fireplace. The homeowner had a functional fireplace but rarely used it due to the hassle of wood handling, ash cleanup, and concern about Seattle burn ban compliance during winter inversions. Converting to a gas log set preserved the look of a traditional fireplace while gaining all the convenience of gas.

EPA Phase 2-certified wood stove installation in a Lake Meridian home in Kent. The homeowner wanted a high-efficiency wood heat source for their open-plan living area. We handled the complete installation including hearth preparation, stainless liner, and all code-compliance work from permit to final inspection.

Complete wood-to-gas fireplace conversion in Lake Forest Park. The existing wood-burning fireplace was functional but inefficient the homeowner estimated they used it fewer than five times per year due to the hassle of wood and ash. Converting to a gas insert transformed it into a convenient, efficient heat source used almost daily during the heating season.

Repointed deteriorated mortar joints and applied a 10-year waterproofing sealant on a Kennydale home in Renton. The homeowner had received a competing bid for a full chimney rebuild at over $8,000. Our assessment found the brick was structurally sound only the mortar needed attention. Targeted tuckpointing and sealing solved the problem for a fraction of the rebuild cost.

Diagnosed and repaired a faulty gas valve and thermocouple on a gas fireplace in Cascade-Fairwood, Renton. The fireplace had stopped igniting completely. Our technician diagnosed both a failed thermopile and a sticking gas valve, replaced both components with OEM parts, and restored full safe operation the same day.

Converted a wood-burning fireplace to a premium gas insert in the Meydenbauer neighborhood of Bellevue. The homeowner wanted the ambiance of a real fireplace with the convenience of instant gas ignition. We installed a high-efficiency insert, fabricated a custom surround to fit the existing opening, and wired a remote thermostat for easy operation.

Pre-sale Level 2 chimney inspection with a full photo report for a real estate transaction in the Crossroads neighborhood of Bellevue. The listing agent needed a certified chimney report within 24 hours to satisfy the buyer's contingency. We completed the full inspection, generated a detailed photo report, and delivered it same day.

Removed a complete lint blockage from a 25-foot dryer vent run in a West Hill home in Kent. The homeowner reported the dryer was taking two full cycles to dry a single load a classic sign of restricted airflow. Our technician removed a significant lint buildup that had accumulated over several years, restoring full airflow.

Complete prefab chimney system repair on a Bothell home with a wood-framed chimney chase. The galvanized steel chase cover had rusted through, allowing water to run directly into the chase and saturate the framing and any debris at the base. The factory chimney cap had blown off in a windstorm.









Each project above is backed by our full-service chimney care program.
We've completed projects across all of King County.
REQUEST AN APPOINTMENT ONLINE
Fast, Easy, and Free Quote!